NetApp CN1610 Cli Command Reference Download Page 100

Page: 100 / 708

Chapter 3: Management Commands

no snmp-server
group

This command removes the specified group.

snmp-server host

This command configures traps to be sent to the specified host.

auth

This group can be accessed only when using
Authentication but not Encryption. Applicable only
if SNMPv3 is selected.

priv

This group can be accessed only when using both
Authentication and Encryption. Applicable only if
SNMPv3 is selected.

context-name

The SNMPv3 context used during access.
Applicable only if SNMPv3 is selected.

read-view

The view this group will use during GET requests.
The range is 1 to 30 characters.

write-view

The view this group will use during SET requests.
The range is 1 to 30 characters.

notify-view

The view this group will use when sending out traps.
The range is 1 to 30 characters.

Parameter

Description

Format

no snmp-server group

group-name

{v1|v2c| 3

{noauth|auth|priv}} [context context-name]

Mode

Global Config

Default

No default hosts are configured.

Format

snmp-server host

host-addr

{informs [timeout

seconds

]

[retries

retries

]|traps version {1 | 2c }} community-

string [udp-port

port

] [filter

filter-name

]

Mode

Global Config

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CN1610

Reviews:

Brands by name

Popular brands

NetApp CN1610, Cli Command Reference

Search results

Summary of Contents for CN1610

Reviews:

Brands by name

Popular brands