manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 98

Chapter 3: Management Commands

95

 

CAUTION

Changing the engine-id will invalidate all SNMP configuration that exists on 
the box.

no snmp-server 
engineID local

This command removes the specified engine ID.

snmp-server filter

This command creates a filter entry for use in limiting which traps will be sent to 
a host.

default

Sets the engine-id to the default string, based on the 
device MAC address.

Parameter

Description

Default

The engineID is configured automatically, based on the device 
MAC address.

Format

no snmp-server engineID local

Mode

Global Config

Default

No filters are created by default.

Format

snmp-server filter 

filtername

 

oid-tree

 

{included|excluded}

Mode

Global Config

Parameter

Description

filtername

The label for the filter being created. The range is 1 
to 30 characters.

oid-tree

The OID subtree to include or exclude from the 
filter. Subtrees may be specified by numerical 
(1.3.6.2.4) or keywords (system), and asterisks may 
be used to specify a subtree family (1.3.*.4).

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands