manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 111

108

RADIUS Commands

 

radius server 
attribute 4

This command specifies the RADIUS client to use the NAS-IP Address attribute 
in the RADIUS requests. If the specific IP address is configured while enabling 
this attribute, the RADIUS client uses that IP address while sending NAS-IP-
Address attribute in RADIUS communication.

no radius server 
attribute 4

The 

no

 version of this command disables the NAS-IP-Address attribute global 

parameter for RADIUS client. When this parameter is disabled, the RADIUS 
client does not send the NAS-IP-Address attribute in RADIUS requests.

The following shows an example of the command.

(CN1610) (Config) #radius server attribute 4  192.168.37.60

(CN1610) (Config) #radius server attribute 4 

radius server host

This command configures the IP address or DNS name to use for communicating 
with the RADIUS server of a selected server type. While configuring the IP 
address or DNS name for the authenticating or accounting servers, you can also 
configure the port number and server name. If the authenticating and accounting 
servers are configured without a name, the command uses the 
Default_RADIUS_Auth_Server and Default_RADIUS_Acct_Server as the 
default names, respectively. The same name can be configured for more than one 
authenticating servers and the name should be unique for accounting servers. The 
RADIUS client allows the configuration of a maximum 32 authenticating and 
accounting servers.

Format

radius server attribute 4 [

ipaddr

]

Mode

Global Config

Term

Definition

4

NAS-IP-Address attribute to be used in RADIUS 
requests.

ipaddr

The IP address of the server.

Format

no radius server attribute 4 [

ipaddr

]

Mode

Global Config

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands