manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 558

Chapter 5: Switching Commands

555

 

The following shows example CLI display output for the command.

(FASTPATH Switching) #show lldp remote-device detail 0/7

LLDP Remote Device Detail

Local Interface: 0/7

Remote Identifier: 2

Chassis ID Subtype: MAC Address

Chassis ID: 00:FC:E3:90:01:0F

Port ID Subtype: MAC Address

Port ID: 00:FC:E3:90:01:11

System Name:

System Description:

Port Description:

System Capabilities Supported:

System Capabilities Enabled:

Time to Live: 24 seconds

show lldp local-
device

Use this command to display summary information about the advertised LLDP 
local data. This command can display summary information or detail for each 
interface.

Time To Live

The amount of time (in seconds) the remote device's 
information received in the LLDPDU should be 
treated as valid information.

Term

Definition

Format

show lldp local-device {slot/port | all}

Mode

Privileged EXEC

Term

Definition

Interface

The interface in a slot/port format.

Port ID

The port ID associated with this interface.

Port Description

The port description associated with the interface.

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands