manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 355

352

VLAN Commands

 

no vlan 

This command deletes an existing VLAN. The ID is a valid VLAN identification 
number (ID 1 is reserved for the default VLAN). The VLAN range is 2-4093.

vlan acceptframe

This command sets the frame acceptance mode on an interface or range of 
interfaces. For VLAN Only mode, untagged frames or priority frames received 
on this interface are discarded. For Admit All mode, untagged frames or priority 
frames received on this interface are accepted and assigned the value of the 
interface VLAN ID for this port. For admituntaggedonly mode, only untagged 
frames are accepted on this interface; tagged frames are discarded. With any 
option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q 
VLAN Specification.

no vlan 
acceptframe

This command resets the frame acceptance mode for the interface or range of 
interfaces to the default value.

vlan ingressfilter

This command enables ingress filtering on an interface or range of interfaces. If 
ingress filtering is disabled, frames received with VLAN IDs that do not match 
the VLAN membership of the receiving interface are admitted and forwarded to 
ports that are members of that VLAN.

Format

no vlan 

2-4093

Mode

VLAN Config

Default

all

Format

vlan acceptframe {admituntaggedonly | vlanonly | all}

Mode

Interface Config

Format

no vlan acceptframe

Mode

Interface Config

Default

disabled

Format

vlan ingressfilter

Mode

Interface Config

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands