manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 366

Chapter 5: Switching Commands

363

 

Term

Definition

Primary

Primary VLAN identifier. The range of the VLAN 
ID is 1 to 4093.

Secondary

Secondary VLAN identifier.

Type

Secondary VLAN type (community, isolated, or 
primary).

Ports

Ports which are associated with a private VLAN.

VLAN ID

The VLAN identifier (VID) associated with each 
VLAN. The range of the VLAN ID is 1 to 4093.

VLAN Name

A string associated with this VLAN as a 
convenience. It can be up to 32 alphanumeric 
characters long, including blanks. The default is 
blank. VLAN ID 1 always has a name of 

Default

. 

This field is optional.

VLAN Type

Type of VLAN, which can be Default (VLAN ID = 
1) or static (one that is configured and permanently 
defined), or Dynamic. A dynamic VLAN can be 
created by GVRP registration or during the 802.1X 
authentication process (DOT1X) if a RADIUS-
assigned VLAN does not exist on the switch.

Interface 

slot/port. It is possible to set the parameters for all 
ports by using the selectors on the top line.

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands