manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 649

646

DiffServ Show Commands

 

show policy-map 
interface

This command displays policy-oriented statistics information for the specified 
interface and direction. The slot/port

 

parameter specifies a valid interface for the 

system. Instead of slot/port

, 

lag 

lag-intf-num

 

can be used as an alternate way 

to specify the LAG interface. 

lag

 lag-intf-num

 can also be used to specify the 

LAG interface where 

lag-intf-num

 is the LAG port number.

Note

This command is only allowed while the DiffServ administrative mode is 
enabled.

The following information is repeated for each class instance within this policy:

show service-policy

This command displays a summary of policy-oriented statistics information for 
all interfaces in the specified direction. 

Format

show policy-map interface slot/port

 

[in]

Mode

Privileged EXEC

Term

Definition

Interface

slot/port

Direction

The traffic direction of this interface service.

Operational Status

The current operational status of this DiffServ 
service interface.

Policy Name

The name of the policy attached to the interface in 
the indicated direction.

Term

Definition

Class Name

The name of this class instance.

In Discarded Packets

A count of the packets discarded for this class 
instance for any reason due to DiffServ treatment of 
the traffic class. 

Format

show service-policy in

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands