manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 427

424

Port-Based Network Access Control Commands

 

If you use the optional parameter 

statistics

 slot/port, the following dot1x 

statistics for the specified port appear.

VLAN-Assigned

The VLAN assigned to the client by the radius 
server.

Logical Port

The logical port number associated with the client.

Term

Definition

Port

The interface whose statistics are displayed.

EAPOL Frames 
Received

The number of valid EAPOL frames of any type that 
have been received by this authenticator.

EAPOL Frames 
Transmitted

The number of EAPOL frames of any type that have 
been transmitted by this authenticator.

EAPOL Start Frames 
Received

The number of EAPOL start frames that have been 
received by this authenticator.

EAPOL Logoff 
Frames Received

The number of EAPOL logoff frames that have been 
received by this authenticator.

Last EAPOL Frame 
Version

The protocol version number carried in the most 
recently received EAPOL frame.

Last EAPOL Frame 
Source

The source MAC address carried in the most 
recently received EAPOL frame.

EAP Response/Id 
Frames Received

The number of EAP response/identity frames that 
have been received by this authenticator.

EAP Response 
Frames Received

The number of valid EAP response frames (other 
than resp/id frames) that have been received by this 
authenticator.

EAP Request/Id 
Frames Transmitted

The number of EAP request/identity frames that 
have been transmitted by this authenticator.

Term

Definition

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands