manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 460

Chapter 5: Switching Commands

457

 

no port-channel 
adminmode

This command disables all configured port-channels with the same 
administrative mode setting.

port-channel 
linktrap

This command enables link trap notifications for the port-channel (LAG). The 
interface is a logical slot/port for a configured port-channel. The option 

all 

sets 

every configured port-channel with the same administrative mode setting. 

no port-channel 
linktrap

This command disables link trap notifications for the port-channel (LAG). The 
interface is a logical slot and port for a configured port-channel. The option 

all 

sets every configured port-channel with the same administrative mode setting.

port-channel load-
balance

This command selects the load-balancing option used on a port-channel (LAG). 
Traffic is balanced on a port-channel (LAG) by selecting one of the links in the 
channel over which to transmit specific packets. The link is selected by creating a 
binary pattern from selected fields in a packet, and associating that pattern with a 
particular link.

Load-balancing is not supported on every device. The range of options for load-
balancing may vary per device.

Mode

Global Config

Format

no port-channel adminmode all

Mode

Global Config

Default

enabled

Format

port-channel linktrap {

logical 

slot/port | all}

Mode

Global Config

Format

no port-channel linktrap {

logical 

slot/port | all}

Mode

Global Config

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands