Minebea Intec CSD-903, Operating Instructions Manual

Page: 70 / 244

Item Function No. Setting Contents
Automatic print operation F-16 00 to 11
00*
10
0
digit: Manual print operation is efective only
when stable
0: Efective only when stable
1: Always efective
10
1
digit: Automatic print operation
0: Automatic printing of
1: Automatic printing only when stable
0* Synchronized with Hold HOLD operation F-17
1 Synchronized with Inlow Finish
Hold target F-18 0000 to 1111
0001
0: Invalid
1: Valid
10
0
digit: Display
10
1
digit: Comparison result
10
2
digit: CC-link interface
10
3
digit: Serial interface
0* OFF
1 A Brand (1 digit)/Accumulation times (6 di-
gits)/Accumulation value (8 digits)
2 B Brand (1 digit)/Accumulation times (6 di-
gits)/Last accumulated data (6 digits)
3 C Brand (1 digit)/Last accumulated data (6 di-
gits)/Accumulation value (8 digits)
4 D Brand (1 digit)/Last accumulated data (6 di-
gits)/OK (6 digits)
5 E Brand (1 digit)/Accumulation times (6 digits)/OK
(6 digits)
6 F Brand (1 digit)/OK (6 digits)/Accumulation value
(8 digits)
7 G Brand (1 digit)/Near zero (6 digits)/Full (6 digits)
8 (No letter) OK (6 digits)/Over (5 digits)/Under (5
digits)
9 I Brand (1 digit)/OK (6 digits)/Overshoot (6 digits)
10 J Brand (1 digit)/S1 (6 digits)/S2 (6 digits)
11 K Brand (1 digit)/S1 (6 digits)/S3 (6 digits)
12 L Brand (1 digit)/S1 (6 digits)/S4 (6 digits)
13 M Brand (1 digit)/S2 (6 digits)/S3 (6 digits)
14 N Brand (1 digit)/S2 (6 digits)/S4 (6 digits)
15 O Brand (1 digit)/S3 (6 digits)/S4 (6 digits)
Selection of sub-display
section
F-19
16 P Brand (1 digit)/OK (6 digits)
Weight indicator CSD-903 9 Function mode
EN-68 Minebea Intec