Minebea Intec CSD-903, Operating Instructions Manual

Page: 145 / 244

Number Details
20 If the load cell output and numerical input is equal to or less than
–2.5 mV/V and exceeds the zero calibration range on the negative side
during calibration
21 If the load cell output and numerical input is equal to or more than
2.5 mV/V and exceeds the zero calibration range on the positive side
during calibration
22 If the load cell output and numerical input is less than 0 mV/V and does
not reach the span calibration range during calibration
23 If the load cell output and numerical input is more than 3.1 mV/V and
exceeds the span calibration range during calibration
31 EEPROM writing error
Hold registration (word read/write reference No. 4)
Address Data name
1 to 9 UNUSED
11 to 12 FINAL/S1
13 to 14 OVERSHOOT/S4
15 to 16 PRIOR TO FIXED VALUE 1/S3
17 to 18 PRIOR TO FIXED VALUE 2/S2
19 to 20 OVER
21 to 22 UNDER
23 to 24 NEAR ZERO
25 to 26 FULL
27 to 28 PRESET TARE WIGHT
29 to 30 POST-BATCHING TIME
31 to 32 CALMING TIME AFTER POST-BATCHING
33 to 34 BRAND NO. 1 AUTOMATIC OVERSHOOT COMPENSATION
35 to 265 UNUSED
267 to 268 BRAND NO. 1 FINAL/S1
269 to 270 BRAND NO. 1 OVERSHOOT/S4
271 to 272 BRAND NO. 1 PRIOR TO FIXED VALUE 1/S3
273 to 274 BRAND NO. 1 PRIOR TO FIXED VALUE 2/S2
275 to 276 BRAND NO. 1 OVER
277 to 278 BRAND NO. 1 UNDER
279 to 280 BRAND NO. 1 NEAR ZERO
281 to 282 BRAND NO. 1 FULL
283 to 284 UNUSED
17 ModBus communication Weight indicator CSD-903
Minebea Intec EN-143