20 Troubleshooting
This chapter describes corrective measures to be taken in the event of abnormal
operation or if an error message is displayed.
When abnormal point(s) is/are found during the operation of the instrument, check by the
following procedures.
Moreover, when you cannot ind applicable item or solve the symptom of trouble even
after you have taken some measures, contact with Minebea Intec.
20.1 Execute trouble shooting
Execute troubleshooting
.
↓
↓
Does supply power voltage satisfy
the speciications?
→ No→
Supply power source suitable for
the speciications.
↓
Yes
↓
Display is wrong.
→ Yes →
To check of the display.
↓
No
↓
Measurement operation is wrong.
→ Yes →
To the measuring operation check.
↓
No
↓
Operation of standard communica-
tion is wrong.
→ Yes →
To the standard communication
check.
↓
No
↓
The external control I/O does not
operate.
→ Yes →
To check the external control I/O.
↓
No
↓
Operations of options is/are
wrong.
→ Yes →
To check options.
↓
Yes
↓
Inform Minebea Intec about the
contens of failure and situation at
site in details.
Weight indicator CSD-903
20 Troubleshooting
EN-218
Minebea Intec
Summary of Contents for CSD-903
Page 243: ......
