10.11.2.2 Automatic accumulation
When the value set for the 10
1
digit for F-50 is
0: Automatic accumulation does not function;
1: Accumulation automatically synchronizes with the inish signal; and,
2: Accumulation functions automatically provided the stability sign of status display is lit.
The values for the 10
2
digit for F-50, provided that [1] and its 10
1
digit for F-50 have been
set, is
0: Accumulation works automatically provided that the inish signal is output with OK lit
in the status display; and,
1: Accumulation works automatically provided that the inish signal is output regardless
of the OK lighting status.
Note:
-
If results exceed the display range of the accumulation value or accumulation times,
accumulation is not executed. [ACCUM.] blinks in the status display.
-
Accumulation is prohibited if the result exceeds ±100% of the maximum load.
10.11.3 Display range for accumulated value and count
The accumulation value display ranges from –9 999 999 999 to 9 999 999 999.
The accumulated count display ranges from 0 to 999 999.
The upper limit for accumulated value disregards the displayed decimal point.
Example: When the position of decimal point is 0.0, the upper limit of the accumulated
value is 9 999 999 99.9.
Note:
When the accumulated value and the accumulated count exceed the display range, the
additive of the count is not executed.
Clear the accumulated value and count if the sub-display is an error code.
10.11.4 Clear accumulation value and accumulation times
Clears the accumulation value and the accumulation times.
The four methods for accumulating data as follows.
-
Press the [ZERO] key in accumulation display mode.
-
Assign a[F] key to [Accumulation clear] by setting F-55.
-
Clear all brand accumulation by setting the external control I/O.
-
Clear all brand accumulation using SQ function SQF-98.
For details of accumulation display mode, refer to Chapter
.
For details of SQ function setting, refer to Chapter
10 Various operations by function data
Weight indicator CSD-903
Minebea Intec
EN-83
Summary of Contents for CSD-903
Page 243: ......
