MACROMEDIA DIRECTOR MX-USING DIRECTOR MX, Use Manual

Page: 508 / 624

Chapter 19 508
whichModel
.
keyframePlayer.
playRate
Get and set A value indicating how quickly or slowly to
play back the motion. For example, a value of
2.0 doubles the speed of the motion; a value
of 0.5 halves the speed of the motion. This
value is multiplied by the value of the
playRate parameter of the play or
queue
command.
1.0
whichModel
.
keyframePlayer.
playList.count
Get Current number of motions in the play list.
0
whichModel
.
keyframePlayer.
rootLock
Get and set
TRUE (1)
= root translational component of
the model remains at its referenced
unanimated position (and therefore cannot
disappear offstage).
FALSE (0)
whichModel
.
keyframePlayer.
currentLoopState
Get and set
TRUE (1)
= animation loops;
FALSE (0)
=
animation plays through once.
FALSE (0)
whichModel
.
keyframePlayer.
blendTime
Get and set Length in milliseconds of the period when
blending takes place between motions. The
blendTime
property is linked to motion
duration. Motion blending is disabled if
blendTime = 0 and autoBlend =
TRUE
.
500
whichModel
.
keyframePlayer.
autoBlend
Get and set If
TRUE
, automatic linear blending (from 0.0
to 100.0) is applied over the blend time.
Otherwise,
blendTime
is ignored, and the
amount of blending is user-determined by
the
blendFactor
property.
TRUE (1)
whichModel
.
keyframePlayer.
blendFactor
Get and set The degree of blending between motions,
expressed as a floating-point value between
0.0
and
100.0
.
A value of
0.0
uses all the previous motion.
A value of
100.0
uses all of the next motion.
The
blendFactor
can be changed frame
by frame to create custom blending effects.
0
whichModel
.
keyframePlayer.
positionReset
Get and set
TRUE (1)
= object returns to starting
position at end of animation;
FALSE (0)
=
object remains at final animation position,
and begins again from there if looping is on.
TRUE (1)
Property Access Description Returns