MACROMEDIA DIRECTOR MX-USING DIRECTOR MX, Use Manual

Page: 228 / 624

Chapter 7 228
Using patterns
You can select among three sets of patterns that are included with Director or create custom
patterns. The patterns you change or edit in the Paint window do not affect the patterns that are
available for shapes.
To use a pattern:
1
Select the Brush tool, the Bucket tool, or one of the filled shape tools.
2
Select the type of pattern from the Patterns pop-up menu.
To manually specify a pattern, select Pattern Settings from the pop-up menu. See “Editing
patterns” on page 228.
Editing patterns
You can change patterns before using them by changing the settings in the Pattern Settings dialog
box. Each change you make is immediately previewed.
To select a new set of patterns or create a custom pattern:
1
Select Pattern Settings from the bottom of the Patterns pop-up menu.
2
Select an option from the pop-up menu at the top of the Pattern Settings dialog box:
•
To select one of the standard, noneditable sets of patterns, select QuickDraw, Grays,
or Standard.
•
To edit a pattern, select Custom. Custom is an editable copy of the Standard palette set.
3
Select the pattern to edit or use the Copy and Paste buttons to move an existing pattern to one
of the empty tile positions.
4
Use any of the following methods to edit the pattern:
•
Click the magnified image of the pattern. Click a blank pixel to fill it, and click a filled pixel to
make it blank.
•
Click the right, left, up, and down arrows to move the pattern one pixel in any direction.
•
Click the Black and White square to reverse the colors of the pattern (for example, black
becomes white, and white becomes black).