MACROMEDIA DIRECTOR MX-USING DIRECTOR MX, Use Manual

Page: 506 / 624

Chapter 19 506
Bones player events
These events are generated by bones animations:
whichModel
.
bonesPlayer.
rotationReset
Get and set Normally a model snaps back to its original
rotation after a motion finishes playing. This
property maintains any or all of the rotational
changes after playing is complete.
The values are as follows:
#none
#x
#y
#z
#xy
#xz
#all
#all
whichModel
.
bonesPlayer.
lockTranslation
Get and set Defines the axis of translation to ignore when
playing back a motion.
The values are as follows:
#none
#x
#y
#z
#xy
#xz
#all
To keep a model locked to a ground plane
with the top pointing along the z-axis, set
lockTranslation
to
#z
.
lockTranslation
=
#all
is equivalent to
rootLock
=
TRUE (1)
.
#none
Event name Description
#animation
Started
This is a system-defined notification event triggered when a motion begins playing. If
looping is on, this event is triggered only by the first playthrough. During a blend of two
animations, this event is triggered as the blend begins.
#animation
Ended
This is a system-defined notification event triggered when a motion ends. If looping is
on, this event is triggered only by the first playthrough. If blending is on, this event is
generated for the first animation when the blend is complete. There may be
some latency because of the overhead of scheduling all other Director events.
Property Access Description Default