MACROMEDIA DIRECTOR MX-USING DIRECTOR MX, Use Manual

Page: 315 / 624

Using Flash and Other Interactive Media Types 315
4
To view or edit the cast member name, use the Name field.
5
To add comments about the cast member, use the Comments field.
6
To specify how Director removes the cast member from memory if memory is low, select one
of the following options from the Unload pop-up menu:
3—Normal
sets the selected cast members to be removed from memory after any priority 2 cast
members have been removed.
2—Next
sets the selected cast members to be among the first removed from memory.
1—Last
sets the selected cast members to be the last removed from memory.
0—Never
sets the selected cast members to be retained in memory; these cast members are
never unloaded.
7
Click the Linked Movie tab in Graphical mode.
8
To determine how the linked movie appears within the sprite bounding rectangle, select a
Framing option:
Crop
displays the movie image at its default size. Any portions that extend beyond the sprite’s
rectangle are not visible.
Center
is available only if Crop is selected. It keeps the movie centered within the sprite’s
bounding rectangle if you resize the sprite.
Scale
resizes the movie to fit inside the bounding rectangle.
9
To determine how the linked movie plays back, set the following options
Play Sound
enables the sound portion of the linked movie. Turn this option off to
mute sounds.
Loop
replays the linked movie continuously from the beginning to the end and back to the
beginning.
Enable Scripts
makes all the scripts in the linked movie work the same way they do when the
movie plays by itself.
If you import a Director movie internally, it is imported as a film loop. In this case, the Linked
Movie tab in the Property inspector is replaced by the Film Loop tab, and the Enable Scripts
option is not available.