MACROMEDIA DIRECTOR MX-USING DIRECTOR MX, Use Manual

Page: 467 / 624

The 3D Cast Member, 3D Text, and 3D Behaviors 467
Using the 3D Behavior Library
All 3D behaviors are listed in the Behavior Library. The Behavior Library is divided into two
sublibraries: actions and triggers.
To view 3D trigger behaviors:
1
Click the Library Palette button on the Director toolbar.
2
Click the Library List button and select 3D.
3
Select Triggers from the 3D submenu.
The trigger behaviors appear, as shown in the following figure.
The following table describes the available triggers.
You can add modifier keys to any trigger, so that a given trigger can launch two actions,
depending on whether the modifier key is pressed. You can, for example, use Mouse Left and
Mouse Left-Shift as separate triggers.
To view 3D action behaviors:
1
Click the Library Palette button on the Director toolbar.
2
Click the Library List button and select 3D.
3
Select Actions from the 3D submenu.
Name Description
Mouse Left Triggers action when the user presses, holds down, or releases the left mouse
button (Windows) or the mouse button (Macintosh).
Mouse Right (Windows only) Triggers action when user presses, holds down, or releases the right mouse button.
This trigger does not work with Shockwave or on the Macintosh. The same results
can be achieved by using the left mouse button (Windows) or the mouse button
(Macintosh) with modifier keys.
Mouse Within Triggers an action when the pointer is inside a sprite.
Mouse Enter Triggers an action when the pointer enters a sprite.
Mouse Leave Triggers an action when the pointer leaves a sprite.
Keyboard Input Lets the author specify a given key as a trigger.