MACROMEDIA DIRECTOR MX-USING DIRECTOR MX, Use Manual

Page: 272 / 624

Chapter 9 272
Setting transition cast member properties
You use the Property inspector to set values for the transition cast member.
To view or change transition cast member properties:
1
Select a transition cast member.
2
To display the Property inspector, select Modify > Cast Member > Properties, or select
Window > Property Inspector.
3
If necessary, click the Member tab and display the Graphical mode.
The following noneditable settings appear:
•
The cast member size in kilobytes
•
The cast member creation and edit dates
•
The name of the last person who modified the cast member
4
To view or edit the cast member name, use the Name field.
5
To add comments about the cast member, use the Comments field.
6
To specify how Director removes the cast member from memory if memory is low, select one
of the following options from the Unload pop-up menu:
3—Normal
sets the selected cast members to be removed from memory after any priority 2 cast
members have been removed.
2—Next
sets the selected cast members to be among the first removed from memory.
1—Last
sets the selected cast members to be the last removed from memory.
0—Never
sets the selected cast members to be retained in memory; these cast members are
never unloaded.
7
If you are using an Xtra extension transition, click Options to set values that are specific to the
Xtra extension transition. The contents of the Options dialog box is determined by the
developer of the Xtra extension. Refer to any documentation supplied with the Xtra extension.