Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 159

Page: 159 / 1022

Step 5.

Connect the mini-SAS HD (12Gb) and power cables to the optional front hot-swap backplane (see
Figure 161 “2.5-inch hard disk drive with ServeRAID SAS controller cable connection (no 2.5-inch
hot-swap hard disk drive installed)” on page 219).

Step 6.

Install the backplane into the optional front 2.5-inch hot-swap hard disk drive cage.

000

Backplane

Figure 70. Backplane installation

Step 7.

Press down and slide the backplane outward until the backplane clicks into place.

000

Backplane

Figure 71. Backplane installation completed

Step 8.

Route the cables and connect the other end of the mini-SAS HD (12Gb) and power cables to
the RAID adapter and planar power connector (see “Cabling hard disk drive with ServeRAID
SAS/SATA controller” on page 218).

Step 9.

Install the hard disk drive(s) if there is any (see “Removing and installing drives” on page 164).

Step 10. Reinstall the cover (see “Installing the compute node cover” on page 115).

Step 11. Slide the node into the rack.

Step 12. Reconnect the power cords and any cables that you removed.

Step 13. Turn on the peripheral devices and the node.

Chapter 5

Removing and replacing components

145

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 159 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: