Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 797

Page: 797 / 1022

•

816f0807-0302ffff : [ProcessorElementName] has been Enabled. (CPU 2)

This message is for the use case when an implementation has detected a Processor has been Enabled.

May also be shown as 816f08070302ffff or 0x816f08070302ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0060

User Response

No action; information only.

•

816f0807-2584ffff : [ProcessorElementName] has been Enabled. (All CPUs)

This message is for the use case when an implementation has detected a Processor has been Enabled.

May also be shown as 816f08072584ffff or 0x816f08072584ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0060

User Response

No action; information only. One of the CPUs :

•

816f0813-2581ffff : System [ComputerSystemElementName]has recovered from an Uncorrectable

Bus Error. (DIMMs)

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

783

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 797 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: