Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 320

Page: 320 / 1022

3. Make sure that the heat sink for microprocessor n.

4. (Trained technician only) Replace system board.

•

80010901-3701ffff : Numeric sensor [NumericSensorElementName] going high (upper critical) has

asserted. (Ambient Temp)

This message is for the use case when an implementation has detected an Upper Critical sensor going
high has asserted.

May also be shown as 800109013701ffff or 0x800109013701ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0494

User Response

1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and

rear of the server), that the air baffle is in place and correctly installed, and that the server cover
is installed and completely closed.

2. Check the ambient temperature. You must be operating within the specifications (see Server

Features and specifications for more information).

3. (Trained technician only) Replace system board.

•

80010901-3702ffff : Numeric sensor [NumericSensorElementName] going high (upper critical)

has asserted. (PIB Ambient Temp)

This message is for the use case when an implementation has detected an Upper Critical sensor going
high has asserted.

May also be shown as 800109013702ffff or 0x800109013702ffff

Severity

Error

Serviceable

Yes

Automatically notify support

306

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 320 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: