Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 433

Page: 433 / 1022

CIM Information

Prefix:

PLAT

ID:

0392

User Response

Please ensure the PCI riser 1 has been installed correctly.

•

806f0125-2c01ffff : [ManagedElementName] detected as absent. (Exlom Card)

This message is for the use case when an implementation has detected a Managed Element is Absent.

May also be shown as 806f01252c01ffff or 0x806f01252c01ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0392

User Response

Please ensure the PCI riser 1 has been installed correctly.

•

806f0207-0301ffff : [ProcessorElementName] has Failed with FRB1/BIST condition. (CPU 1)

This message is for the use case when an implementation has detected a Processor Failed - FRB1/BIST
condition.

May also be shown as 806f02070301ffff or 0x806f02070301ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Yes

Alert Category

Critical - CPU

SNMP Trap ID

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

419

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 433 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: