Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 142

Page: 142 / 1022

Filler

Figure 45. Filler installation

Step 3.

Reinstall the cover (see “Installing the compute node cover” on page 115).

Step 4.

Slide the compute node into the rack.

Step 5.

Reconnect the power cords and any cables that you removed.

Step 6.

Turn on the peripheral devices and the compute node.

Removing the front handle

Use this information to remove the front handle.

Before you remove the front handle, complete the following steps:

1. Read “Safety” on page v and “Installation guidelines” on page 101.

2. If the compute node is installed in a NeXtScale n1200 Enclosure, remove it (see “Removing a compute

node from a chassis” on page 104 for instructions).

3. Carefully lay the compute node on a flat, static-protective surface with the cover side down, orienting

the compute node with the bezel pointing toward you.

To remove the front handle, complete the following steps.

128

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 142 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: