Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 693

Page: 693 / 1022

•

816f020d-0405ffff : Failure no longer Predicted on drive [StorageVolumeElementName] for array

[ComputerSystemElementName]. (Computer HDD6)

This message is for the use case when an implementation has detected an Array Failure is no longer
Predicted.

May also be shown as 816f020d0405ffff or 0x816f020d0405ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Predicted Failure

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0169

User Response

No action; information only.

•

816f020d-0406ffff : Failure no longer Predicted on drive [StorageVolumeElementName] for array

[ComputerSystemElementName]. (Computer HDD7)

This message is for the use case when an implementation has detected an Array Failure is no longer
Predicted.

May also be shown as 816f020d0406ffff or 0x816f020d0406ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Predicted Failure

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0169

User Response

No action; information only.

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

679

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 693 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: