Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 394

Page: 394 / 1022

CIM Information

Prefix:

PLAT

ID:

0036

User Response

1. Make sure that the fans are operating. There are no obstructions to the airflow (front and rear of

the server), the air baffles are in place and correctly installed, and the server cover is installed
and completely closed.

2. Make sure that the heat sink for microprocessor n is installed correctly.

3. (Trained technician only) Replace microprocessor n. (n = microprocessor number)

•

806f0108-1501ffff : [PowerSupplyElementName] has Failed. (HSC Status)

This message is for the use case when an implementation has detected a Power Supply has failed.

May also be shown as 806f01081501ffff or 0x806f01081501ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Yes

Alert Category

Critical - Power

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0086

User Response

Reseat power supply n.

2. If the power-on LED is not lit and the power-supply error LED is lit, replace power supply n.

3. If both the power-on LED and the power-supply error LED are not lit, see Power problems for

more information. (n = power supply number)

•

806f0109-1301ffff : [PowerSupplyElementName] has been Power Cycled. (Host Power)

This message is for the use case when an implementation has detected a Power Unit that has been
power cycled.

May also be shown as 806f01091301ffff or 0x806f01091301ffff

Severity

380

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 394 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: