Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 703

Page: 703 / 1022

•

816f020d-041affff : Failure no longer Predicted on drive [StorageVolumeElementName] for array

[ComputerSystemElementName]. (SDHV Drive 11)

This message is for the use case when an implementation has detected an Array Failure is no longer
Predicted.

May also be shown as 816f020d041affff or 0x816f020d041affff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Predicted Failure

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0169

User Response

No action; information only.

•

816f020d-041bffff : Failure no longer Predicted on drive [StorageVolumeElementName] for array

[ComputerSystemElementName]. (SDHV Drive 12)

This message is for the use case when an implementation has detected an Array Failure is no longer
Predicted.

May also be shown as 816f020d041bffff or 0x816f020d041bffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Predicted Failure

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0169

User Response

No action; information only.

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

689

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 703 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: