Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 198

Page: 198 / 1022

0000

Rear PCI riser
assembly

Figure 117. Rear PCI riser-cage assembly installation

Step 7.

Replace the cover (see “Installing the compute node cover” on page 115).

Step 8.

Slide the server into the rack.

Step 9.

Reconnect the power cords and any cables that you removed.

Step 10. Turn on the peripheral devices and the server.

Removing an adapter/GPU adapter

Use this information to remove an adapter/GPU adapter.

Before you remove an adapter/GPU adapter, complete the following steps:

1. Read “Safety” on page v and “Installation guidelines” on page 101.

2. If the compute node is installed in a NeXtScale n1200 Enclosure, remove it (see “Removing a compute

node from a chassis” on page 104 for instructions).

3. Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with

the bezel pointing toward you.

To remove an adapter/GPU adapter, complete the following steps:

Step 1.

Remove the cover (see “Removing the compute node cover” on page 113).

Step 2.

Remove the PCI riser-cage assembly in the server (see “Removing a PCI riser-cage assembly” on
page 176, “Removing a PCI riser-cage assembly from the GPU tray” on page 178, or “Removing a
PCI riser-cage assembly from the 2U GPU tray” on page 181)

Step 3.

Disconnect any cables from the adapter/GPU adapter.

Step 4.

Place the PCI riser-cage assembly on a flat and static-protective surface.

184

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 198 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: