Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 721

Page: 721 / 1022

CIM Information

Prefix:

PLAT

ID:

0171

User Response

No action; information only.

•

816f030d-040effff : Hot spare disabled for [ComputerSystemElementName]. (1U Storage HDD7)

This message is for the use case when an implementation has detected a Hot Spare has been Disabled.

May also be shown as 816f030d040effff or 0x816f030d040effff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0171

User Response

No action; information only.

•

816f0313-1701ffff : System [ComputerSystemElementName] has recovered from an NMI. (NMI

State)

This message is for the use case when an implementation has detected a Software NMI has been
Recovered from.

May also be shown as 816f03131701ffff or 0x816f03131701ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Critical - Other

SNMP Trap ID

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

707

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 721 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: