Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 732

Page: 732 / 1022

•

816f0507-2584ffff : [ProcessorElementName] has Recovered from a Configuration Mismatch.

(All CPUs)

This message is for the use case when an implementation has Recovered from a Processor Configuration
Mismatch.

May also be shown as 816f05072584ffff or 0x816f05072584ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Critical - CPU

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0063

User Response

No action; information only. One of the CPUs :

•

816f0508-1501ffff : [PowerSupplyElementName] has returned to a Normal Input State. (HSC Status)

This message is for the use case when an implementation has detected a Power Supply that has input
that has returned to normal.

May also be shown as 816f05081501ffff or 0x816f05081501ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0099

User Response

No action; information only.

718

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 732 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: