Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 471

Page: 471 / 1022

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0170

User Response

No action; information only.

•

806f030d-0405ffff : Hot Spare enabled for [ComputerSystemElementName]. (Computer HDD6)

This message is for the use case when an implementation has detected a Hot Spare has been Enabled.

May also be shown as 806f030d0405ffff or 0x806f030d0405ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0170

User Response

No action; information only.

•

806f030d-0406ffff : Hot Spare enabled for [ComputerSystemElementName]. (Computer HDD7)

This message is for the use case when an implementation has detected a Hot Spare has been Enabled.

May also be shown as 806f030d0406ffff or 0x806f030d0406ffff

Severity

Info

Serviceable

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

457

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 471 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: