Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 759

Page: 759 / 1022

•

816f060d-0403ffff : Array in system [ComputerSystemElementName] has been restored.

(Computer HDD4)

This message is for the use case when an implementation has detected that a Failed Array has been
Restored.

May also be shown as 816f060d0403ffff or 0x816f060d0403ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0177

User Response

No action; information only.

•

816f060d-0404ffff : Array in system [ComputerSystemElementName] has been restored.

(Computer HDD5)

This message is for the use case when an implementation has detected that a Failed Array has been
Restored.

May also be shown as 816f060d0404ffff or 0x816f060d0404ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0177

User Response

No action; information only.

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

745

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 759 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: