Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 707

Page: 707 / 1022

•

816f030c-2002ffff : Scrub Failure for [PhysicalMemoryElementName] on Subsystem

[MemoryElementName]has recovered. (DIMM 2)

This message is for the use case when an implementation has detected a Memory Scrub failure recovery.

May also be shown as 816f030c2002ffff or 0x816f030c2002ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Critical - Memory

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0137

User Response

No action; information only.

•

816f030c-2003ffff : Scrub Failure for [PhysicalMemoryElementName] on Subsystem

[MemoryElementName]has recovered. (DIMM 3)

This message is for the use case when an implementation has detected a Memory Scrub failure recovery.

May also be shown as 816f030c2003ffff or 0x816f030c2003ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Critical - Memory

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0137

User Response

No action; information only.

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

693

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 707 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: