Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 635

Page: 635 / 1022

Info

Serviceable

Automatically notify support

Alert Category

Critical - CPU

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0043

User Response

No action; information only.

•

816f0009-1301ffff : [PowerSupplyElementName] has been turned on. (Host Power)

This message is for the use case when an implementation has detected a Power Unit that has been
Enabled.

May also be shown as 816f00091301ffff or 0x816f00091301ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Power On

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0107

User Response

No action; information only.

•

816f000d-0401ffff : The Drive [StorageVolumeElementName] has been removed from unit

[PhysicalPackageElementName]. (Comput HDD0 Pres)

This message is for the use case when an implementation has detected a Drive has been Removed.

May also be shown as 816f000d0401ffff or 0x816f000d0401ffff

Severity

Error

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

621

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 635 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: