Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 601

Page: 601 / 1022

CIM Information

Prefix:

PLAT

ID:

0491

User Response

No action; information only.

•

81010701-3705ffff : Numeric sensor [NumericSensorElementName] going high (upper non-critical)

has deasserted. (PCI Riser 2 Temp)

This message is for the use case when an implementation has detected an Upper Non-critical sensor
going high has deasserted.

May also be shown as 810107013705ffff or 0x810107013705ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Warning - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0491

User Response

No action; information only.

•

81010701-3706ffff : Numeric sensor [NumericSensorElementName] going high (upper non-critical)

has deasserted. (GPU Outlet Temp)

This message is for the use case when an implementation has detected an Upper Non-critical sensor
going high has deasserted.

May also be shown as 810107013706ffff or 0x810107013706ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Warning - Temperature

SNMP Trap ID

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

587

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 601 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: