Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 361

Page: 361 / 1022

•

800a060d-2b81ffff : Sensor [SensorElementName] has indicated a degraded state. (FDIMM Mode)

This message is for the use case when an implementation has detected a Sensor transitioned to a
degraded state.

May also be shown as 800a060d2b81ffff or 0x800a060d2b81ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0552

User Response

No action; information only.

•

800b010c-2581ffff : Redundancy Lost for [RedundancySetElementName] has asserted. (Backup

Memory)

This message is for the use case when Redundancy Lost has asserted.

May also be shown as 800b010c2581ffff or 0x800b010c2581ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Memory

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0802

User Response

1. Check the system-event log for DIMM failure events (uncorrectable or PFA) and correct the

failures.

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

347

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 361 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: