Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 633

Page: 633 / 1022

Severity

Info

Serviceable

Automatically notify support

Alert Category

Critical - Memory

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0803

User Response

No action; information only.

•

810b030c-2581ffff : Non-redundant:Sufficient Resources from Redundancy Degraded or Fully

Redundant for [RedundancySetElementName] has deasserted. (Backup Memory)

This message is for the use case when a Redundancy Set has transitioned from Non-redundant:Sufficient
Resources.

May also be shown as 810b030c2581ffff or 0x810b030c2581ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Warning - Memory

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0807

User Response

No action; information only.

•

810b050c-2581ffff : Non-redundant:Insufficient Resources for [RedundancySetElementName]

has deasserted. (Backup Memory)

This message is for the use case when a Redundancy Set has transitioned from Non-redundant:Insufficient
Resources.

May also be shown as 810b050c2581ffff or 0x810b050c2581ffff

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

619

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 633 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: