Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 615

Page: 615 / 1022

Automatically notify support

Alert Category

Warning - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0521

User Response

No action; information only.

•

8107010d-0b07ffff : Sensor [SensorElementName] has deasserted the transition from normal to

non-critical state. (RAID #7 Volume)

This message is for the use case when an implementation has detected that a Sensor has deasserted a
transition to non-critical from normal.

May also be shown as 8107010d0b07ffff or 0x8107010d0b07ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Warning - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0521

User Response

No action; information only.

•

8107010d-2b81ffff : Sensor [SensorElementName] has deasserted the transition from normal to

non-critical state. (FDIMM Warranty)

This message is for the use case when an implementation has detected that a Sensor has deasserted a
transition to non-critical from normal.

May also be shown as 8107010d2b81ffff or 0x8107010d2b81ffff

Severity

Info

Serviceable

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

601

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 615 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: