Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 371

Page: 371 / 1022

Severity

Info

Serviceable

Automatically notify support

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0162

User Response

No action; information only.

•

806f000d-040effff : The Drive [StorageVolumeElementName] has been added. (1U Stg HDD7 Pres)

This message is for the use case when an implementation has detected a Drive has been Added.

May also be shown as 806f000d040effff or 0x806f000d040effff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0162

User Response

No action; information only.

•

806f000d-0410ffff : The Drive [StorageVolumeElementName] has been added. (SDHV Drive 1)

This message is for the use case when an implementation has detected a Drive has been Added.

May also be shown as 806f000d0410ffff or 0x806f000d0410ffff

Severity

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

357

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 371 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: