Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 327

Page: 327 / 1022

Prefix:

PLAT

ID:

0498

User Response

1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and

rear of the server), that the air baffle is in place and correctly installed, and that the server cover
is installed and completely closed.

2. Check the ambient temperature. You must be operating within the specifications (see Server

Features and specifications for more information).

3. (Trained technician only) Replace system board.

•

80010b01-3703ffff : Numeric sensor [NumericSensorElementName] going high (upper

non-recoverable) has asserted. (HDD Inlet Temp)

This message is for the use case when an implementation has detected an Upper Non-recoverable
sensor going high has asserted.

May also be shown as 80010b013703ffff or 0x80010b013703ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0498

User Response

1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and

rear of the server), that the air baffle is in place and correctly installed, and that the server cover
is installed and completely closed.

2. Check the ambient temperature. You must be operating within the specifications (see Server

Features and specifications for more information).

3. Make sure that HDD is installed correctly

4. (Trained technician only) Replace system board.

•

80010b01-3704ffff : Numeric sensor [NumericSensorElementName] going high (upper

non-recoverable) has asserted. (PCI Riser 1 Temp)

This message is for the use case when an implementation has detected an Upper Non-recoverable
sensor going high has asserted.

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

313

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 327 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: