Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 784

Page: 784 / 1022

•

816f070d-0406ffff : Rebuild completed for Array in system [ComputerSystemElementName].

(Computer HDD7)

This message is for the use case when an implementation has detected that an Array Rebuild has
Completed.

May also be shown as 816f070d0406ffff or 0x816f070d0406ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0179

User Response

No action; information only.

•

816f070d-0407ffff : Rebuild completed for Array in system [ComputerSystemElementName]. (1U

Storage HDD0)

This message is for the use case when an implementation has detected that an Array Rebuild has
Completed.

May also be shown as 816f070d0407ffff or 0x816f070d0407ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0179

User Response

No action; information only.

770

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 784 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: