Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 330

Page: 330 / 1022

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0498

User Response

1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and

rear of the server), that the air baffle is in place and correctly installed, and that the server cover
is installed and completely closed.

2. Check the ambient temperature. You must be operating within the specifications (see Server

Features and specifications for more information).

3. Make sure that HDD is installed correctly.

4. (Trained technician only) Replace system board.

•

80030006-2101ffff : Sensor [SensorElementName] has deasserted. (Sig Verify Fail)

This message is for the use case when an implementation has detected a Sensor has deasserted.

May also be shown as 800300062101ffff or 0x800300062101ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0509

User Response

No action; information only.

•

80030012-2301ffff : Sensor [SensorElementName] has deasserted. (OS RealTime Mod)

316

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 330 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: