Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 733

Page: 733 / 1022

•

816f050c-2001ffff : Memory Logging Limit Removed for [PhysicalMemoryElementName] on

Subsystem [MemoryElementName]. (DIMM 1)

This message is for the use case when an implementation has detected that the Memory Logging Limit
has been Removed.

May also be shown as 816f050c2001ffff or 0x816f050c2001ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Warning - Memory

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0145

User Response

No action; information only.

•

816f050c-2002ffff : Memory Logging Limit Removed for [PhysicalMemoryElementName] on

Subsystem [MemoryElementName]. (DIMM 2)

This message is for the use case when an implementation has detected that the Memory Logging Limit
has been Removed.

May also be shown as 816f050c2002ffff or 0x816f050c2002ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Warning - Memory

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0145

User Response

No action; information only.

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

719

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 733 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: