Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 632

Page: 632 / 1022

Severity

Info

Serviceable

Automatically notify support

Alert Category

Critical - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0525

User Response

No action; information only.

•

8107030d-2b81ffff : Sensor [SensorElementName] has deasserted the transition to non-recoverable

from a less severe state. (FDIMM Warranty)

This message is for the use case when an implementation has detected that the Sensor transition to
non-recoverable from less severe has deasserted.

May also be shown as 8107030d2b81ffff or 0x8107030d2b81ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Critical - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0525

User Response

No action; information only.

•

810b010c-2581ffff : Redundancy Lost for [RedundancySetElementName] has deasserted. (Backup

Memory)

This message is for the use case when Redundacy Lost has deasserted.

May also be shown as 810b010c2581ffff or 0x810b010c2581ffff

618

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 632 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: