Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 211

Page: 211 / 1022

Step 9.

Reinstall the cover (see “Installing the compute node cover” on page 115).

Step 10. Turn on the peripheral devices and the server.

Step 11. If you are replacing a ServeRAID adapter, import your RAID configuration to the replacement

adapter as a foreign configuration. See the ServeRAID-M Software User Guide at
https://support.lenovo.com/us/ en/documents/MIGR-5086126 for instructions.

Note:

When you restart the server, you are prompted to import the existing RAID configuration to the

new ServeRAID adapter.

Removing the USB flash drive

Use this information to remove the USB flash drive.

Before you remove the USB flash drive, complete the following steps:

1. Read “Safety” on page v and “Installation guidelines” on page 101.

2. If the compute node is installed in a NeXtScale n1200 Enclosure, remove it (see “Removing a compute

node from a chassis” on page 104 for instructions).

3. Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with

the bezel pointing toward you.

To remove the USB flash drive, complete the following steps.

Chapter 5

Removing and replacing components

197

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 211 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: