Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 431

Page: 431 / 1022

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0224

User Response

1. (Trained technician only)Reseat the microprocessor, and then restart the server.

2. (Trained technician only)Replace microprocessor n. (n = microprocessor number)

•

806f0123-2101ffff : Reboot of system [ComputerSystemElementName] initiated by

[WatchdogElementName]. (IPMI Watchdog)

This message is for the use case when an implementation has detected a Reboot by a Watchdog occurred.

May also be shown as 806f01232101ffff or 0x806f01232101ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0370

User Response

No action; information only.

•

806f0125-1001ffff : [ManagedElementName] detected as absent. (PCI Riser 1)

This message is for the use case when an implementation has detected a Managed Element is Absent.

May also be shown as 806f01251001ffff or 0x806f01251001ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

417

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 431 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: