Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 185

Page: 185 / 1022

Figure 99. 1.8-inch hard disk drive removal

Step 7.

Unlatch the drive handle.

Handle

Figure 100. 1.8-inch hard disk drive removal

Step 8.

Then, pull the drive out of the drive bay.

Handle

Figure 101. 1.8-inch hard disk drive removal

Step 9.

Close the cage handle into position.

Step 10. Pull the plunger of the 1.8-inch hard disk drive cage outward and rotate the cage downward until

the cage snaps into place.

Chapter 5

Removing and replacing components

171

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 185 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: