Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 864

Page: 864 / 1022

Error

Serviceable

Yes

Automatically notify support

User Response

Complete the following steps:

1. Check the operator information panel cabling for loose or broken connections at both ends or

damage to the cable.

2. Replace the information panel cable if damage is present.

3. Run the test again.

4. Replace the operator information panel assembly.

5. Run the test again.

6. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service

Guide" for the next corrective action.

Related links

–

IBM Support website

–

Latest level of DSA

–

Latest level of BMC/IMM

DSA CPU stress test results

The following messages can result when you run the CPU stress test.

Test results for the DSA CPU stress test

The following messages can result when you run the DSA CPU stress test.

•

089-000-000 : CPU Stress Test Passed

CPU Stress Test Passed.

Recoverable

Severity

Event

Serviceable

Automatically notify support

Related links

–

IBM Support website

–

Latest level of DSA

850

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 864 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: