Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 690

Page: 690 / 1022

This message is for the use case when an implementation has detected a Processor Recovered -
FRB1/BIST condition.

May also be shown as 816f02070302ffff or 0x816f02070302ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Critical - CPU

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0045

User Response

No action; information only.

•

816f0207-2584ffff : [ProcessorElementName] has Recovered from FRB1/BIST condition. (All CPUs)

This message is for the use case when an implementation has detected a Processor Recovered -
FRB1/BIST condition.

May also be shown as 816f02072584ffff or 0x816f02072584ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Critical - CPU

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0045

User Response

No action; information only. One of the CPUs :

•

816f020d-0401ffff : Failure no longer Predicted on drive [StorageVolumeElementName] for array

[ComputerSystemElementName]. (Computer HDD0)

676

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 690 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: