Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 571

Page: 571 / 1022

•

806f072b-2101ffff : A successful software or firmware change was detected on system

[ComputerSystemElementName]. (IMM Promotion)

This message is for the use case when an implementation has detected a Successful Software or
Firmware Change.

May also be shown as 806f072b2101ffff or 0x806f072b2101ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0450

User Response

No action; information only. IMM Recovery :

•

806f072b-2201ffff : A successful software or firmware change was detected on system

[ComputerSystemElementName]. (Bkup Auto Update)

This message is for the use case when an implementation has detected a Successful Software or
Firmware Change.

May also be shown as 806f072b2201ffff or 0x806f072b2201ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0450

User Response

No action; information only. ROM Recovery :

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

557

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 571 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: